China high quality Face Recognition Automatic System Mechanism Turnstile for Gym Flap Barrier with Great quality

Product Description

Face recognition automatic system mechanism turnstile for gym flap barrier

Flap barrier : It is mainly used for the entrance and exit management of the

passage. It has the characteristics of fast opening, safety and convenience. It is an

ideal management and guidance equipment for high-frequency entrance and exit

passages for pedestrians. Widely used in airports, subway stations, stations,

terminals, attractions, parks, shopping malls, office buildings, pedestrian

walkways and other places.


Moduel No. LD-Y602
Size 1400*300*1000mmm
Material 304 stainless steel, tempered glass, acrylic
Wing door width: 255mm; channel width: 550mm
Traffic speed 35-40 persons/minute
Thickness of the cabinet 1.2mm
Drive motor  DC 24V brushless motor, low noise
Control panel  one for one
Traffic direction one-way traffic/two-way traffic
Opening method  ID/IC card and other readers to verify opening, infrared induction automatic opening, button opening, etc.
Opening signal  dry contact signal
Protection function  infrared/current anti-pinch, illegal intrusion infrared alarm
Life  ≥9 million times
Infrared quantity 5 pairs
Power 40-60w
Applicable temperature : -20~75ºC


(1) Automatic return function: After the passage process is completed, the brake

wings automatically return to the initial blocking position.

(2) Power-off and opening function: When the power is off, the system will

automatically open the brake CZPT to open, which is convenient for evacuation

of the crowd and meets fire protection requirements.

(3) Anti-illegal intrusion function: When the card is invalid, there is no card

swiping, or the passage is forbidden, the forcible entry into the channel will be

regarded as illegal intrusion, and the system will automatically alarm and close

the flap.

(4) Anti-reverse intrusion function: Before the end of the passage process in a

certain direction, pedestrians entering the passage from the opposite direction

will be regarded as reverse intrusion, the system will automatically alarm and

close the wing.

(5) Anti-trailing function: The photoelectric switch detects the pedestrian traffic

situation, and detects the following phenomenon (the people behind are close to

the person in front, intending to pass without swiping the card), the system will

automatically alarm and close the brake wings.

(6) Intelligent linkage alarm: including illegal intrusion, reverse traffic and other

alarms, which can be linked with other alarm monitoring equipment and can be heard.

(7) Anti-pinching and anti-collision function:

A. Infrared anti-pinch: Install multiple pairs of photoelectric switches near the

area where the CZPT is active (anti-pinch area). Once a person or object is

detected in the anti-pinch area, the CZPT automatically stops; The flaps

continued to move.

Product advantages

1. Cabinet part:

1.1. Frame material: 304 #, thickness 1.2- 1.5 mm;

1.2. Multi-layer drawing on the surface of the frame;

1.3. The frame is welded by fixtures;

2. Drive Movement part:

2.1. Low noise;

2.2. Movement frame material 6061 profile aluminum;

2.3. The inner CZPT pulley adopts metal bearings;

3. Electric control accessories:

3.1. Switching power supply adopts brand power supply to make its operating

voltage more stable;

3.2. The infrared sensor uses a domestic brand, and the internal parts are

imported parts;

Third, customized extended functions:

1.Counting and alarm functions;

2. The material of the flap (retractable arm) is acrylic or soft flap. The colors are

red, black and blue. The amount can be customized separately

3. Case material is mainly 304 stainless steel, other materials can also be


4.Remote control switch

5. Dynamic face recognition

6. Can add emergency escape function, in the case of special emergency, start by remote button

7. The communication interface is mainly RS232 / RS485, other interfaces

8.Box thickness standard 1.5mm can be customized 2.0mm

10. Fingerprint recognition of time attendance

11. QR code pass

About LIDE:
ZheJiang Lide Intelligence Technology Co., Ltd is a high-tech enterprise integrating R&D, production, sales, installation, training and after-sales, specializing in providing intelligent channel solutions.

The main products are high-quality turnstiles and smart parking management systems, including tripod turnstile, flap barrier gate, swing barrier gate, speed gate, full-height turnstile, facial recognition terminal, vehicle barrier and automatic bollard.

Lide is committed to providing domestic and foreign customers with professional, efficient, and convenient intelligent entry and exit solutions, simplifying the complexity, achieving scientific, intelligent, and data management of personnel and vehicles; improving channel management efficiency, reducing labor costs, and reducing potential safety hazard.

After-sales services:

  1. All the products sold enjoy 18-month warranty and more spare parts are provided.
  2. After-sales service staff are online for 18 hours/day and all emails are replied within 1 hour. We offer life-time technology support on line, by emails, videos, phone calls, etc. We have engineers speaking English, Spanish and Arabic, etc. They are convenient to communicate with buyers or users directly.
  3. Engineers’ on-site services are provided. Engineers are dispatched to customers’ countries to handle various thorny problems.

1. How about your company’s actual strength?
We are the professional manufacturer in turnstiles in China. We have more than 100 employees, a R&D group with 5 people, 1 HQ office and 3 branches. Factories and office buildings are 2000 square meters in total.

2. How about the quality of your products?
We are in the highest level of quality with the most competitive price. For example, we use international standard  China-Japan CZPT stainless steel 304 stainless steel, ZheJiang Minwei electric supplier, belt import from German, 3M clue import from America etc. 

3. How about the lead time?
Normally we have stock for the hot sale models of standard products. Generally standard products need 7-10 working days.The customized products need 15-20 working days.

4. How long is your warranty period?
18 months. Life time spare parts.

5. How about your package?
Exported product: Wooden case package of Export exempted from inspection plus pearl wool and plastic wrap
Domestic: Bubble wrap plus carton or pearl wool plus wooden packaging.


Calculate the ideal mechanical advantage of pulleys

The basic equations for pulleys can be found in this article. It will also cover the different types of pulleys, the ideal mechanical advantages of pulleys, and some common uses of pulley systems. Read on to learn more! After all, a pulley is a simple mechanical device that changes the direction of a force. Learn more about pulleys and their common uses in engineering.

pulley basic equation

Pulleys work the same way as gravity, so they should withstand similar forces. Newton’s laws of motion can be used to calculate the forces in a pulley system. The second law of motion applies to forces and accelerations. Similar to this is Newton’s third law, which states that the directions of forces are equal and opposite. The fourth law dictates the direction of force. The Fifth Law states that tension is in equilibrium with gravity.
A pulley is a simple mechanism that transmits force by changing direction. They are generally considered to have negligible mass and friction, but this is only an approximation. Pulleys have different uses, from sailboats to farms and large construction cranes. In fact, they are the most versatile mechanisms in any system. Some of their most common applications and equations are listed below.
For example, consider 2 masses m. Those of mass m will be connected by pulleys. The static friction coefficient of the left stop is ms1, and the static friction coefficient of the right stop is ms2. A no-slip equation will contain multiple inequalities. If the 2 blocks are considered to be connected by a pulley, the coefficient of kinetic friction is mk. In other words, the weight of each block carries the same mass, but in the opposite direction.

Types of pulleys

A pulley is a device used to pull and push objects. Pulley systems are ropes, cables, belts or chains. The “drive pulley” is attached to the shaft and moves the driven pulley. They are available in a variety of sizes, and the larger they are, the higher the speed of power transmission. Alternatively, use small pulleys for smaller applications.
Two-wheel pulleys have 2 mechanical advantages. The greater the mechanical advantage, the less force is required to move the object. More wheels lift more weight, but smaller pulleys require less force. In a two-wheel pulley system, the rope is wound around 2 axles and a fixed surface. As you pull on the rope, the shafts above slowly come together.
Compound pulleys have 2 or more rope segments that are pulled up on the load. The mechanical advantage of compound pulleys depends on the number of rope segments and how they are arranged. This type of pulley can increase the force by changing the direction of the rope segment. There are 2 main types of pulleys. Composite pulleys are most commonly used in construction. The ideal mechanical advantage of pulleys is 2 or more.
Construction pulleys are a basic type. They are usually attached to wheel rails and can be lifted to great heights. Combinations of axes are also common. Construction pulleys can be raised to great heights to access materials or equipment. When used in construction, these pulleys are usually made of heavy materials such as wood or metal. They are secured with ropes or chains.

The ideal mechanical advantage of pulleys

The pulley system is a highly complex system with high mechanical advantages. Use a single pulley system to reduce the force required to lift an object by cutting it in half. The mechanical advantage increases as you add more pulleys, such as 6 or seven. To calculate the mechanical advantage of a pulley system, you need to count the number of rope segments between the pulleys. If the free end of the rope is facing down, don’t count it. If it’s facing up, count. Once you have your number, add it up.
The required mechanical advantage of a pulley is the number of rope segments it has to pull the load. The more rope segments, the lower the force. Therefore, the more rope segments the pulley has, the lower the force. If the rope segments are four, then the ideal mechanical advantage is four. In this case, the composite pulley quadrupled the load force.
The ideal mechanical advantage of a pulley system is the sum of the mechanical force and the force required to lift the load at its output. Typically, a single pulley system uses 2 ropes, and the mechanical force required to lift the load is multiplied by the 2 ropes. For a multi-pulley system, the number of ropes will vary, but the total energy requirement will remain the same. The friction between the rope and pulley increases the force and energy required to lift the load, so the mechanical advantage diminishes over time.

Common uses of pulley systems

A pulley system is a simple mechanical device typically used to lift heavy objects. It consists of a rotating wheel attached to a fixed shaft and a rope attached to it. When the wheel moves, the force applied by the operator is multiplied by the speed of the pulley, and the force is multiplied by the weight of the object being lifted. Common uses for pulley systems include pulling, lifting, and moving heavy objects.
The oil and petroleum industries use pulley systems in a variety of applications. Most commonly, pulleys are used in drilling operations and they are installed on top of the rig to guide the cable. The cable itself is attached to 2 pulleys suspended in the derrick, where they provide mechanical energy to the cable. Using a pulley system in this application provides the force needed to move the cable safely and smoothly.
The main advantage of the pulley system is that it minimizes the force required to lift an object. The force used to lift the object is multiplied by the desired mechanical advantage. The more rope segments, the lower the force required. On the other hand, a compound pulley system can have many segments. Therefore, a compound pulley system can increase the force a worker can exert on an object.
Safety Precautions to Take When Working on Pulley Systems

There are many safety precautions that should be observed when working on a pulley system. The first is to wear proper protective gear. This includes hard hats that protect you from falling objects. Also, gloves may be required. You should limit the amount of movement in the penalty area, and you should also keep the area free of unnecessary people and objects. Also, remember to wear a hard hat when working on the pulley system.
Another important safety precaution when working on a pulley system is to check the Safe Working Load (SWL) of the pulley before attaching anything. This will help you understand the maximum weight the pulley can hold. Also, consider the angle and height of the pulley system. Always use safety anchors and always remember to wear a hat when working on a pulley system.
Safe use of chain hoists requires training and experience. It is important to read the manufacturer’s manual and follow all safety precautions. If you’re not sure, you can actually inspect the hoist and look for signs of damage or tampering. Look for certifications for sprocket sets and other lifting accessories. Look for the Safe Working Load (SWL) marking on the chain hoist.

Example of a pulley system

Pulley systems are often used to lift items. It allows you to reduce the effort to lift and move the load by applying force in 1 direction. Pulley systems can be built and modeled to fit any type of project. This resource focuses on pulley systems and is designed to support the new GCSEs in Engineering, Design and Technology. There are also many examples of pulley systems suitable for various applications.
In the study, participants who read easy text took longer to manipulate the pulley system than those who read challenging text. In general, this suggests that participants with prior scientific experience used their cognitive abilities more effectively. Additionally, students who read simple texts spent less time planning the pulley system and more time on other tasks. However, the study did show that the time required to plan the pulley system was similar between the 2 groups.
In everyday life, pulley systems are used to lift various objects. Flagpoles are 1 of many pulley systems used to raise and lower flagpoles. They can also be used to raise and lower garage doors. Likewise, rock climbers use pulleys to help them ascend and descend. The pulley system can also be used to extend the ladder.

China high quality Face Recognition Automatic System Mechanism Turnstile for Gym Flap Barrier   with Great qualityChina high quality Face Recognition Automatic System Mechanism Turnstile for Gym Flap Barrier   with Great quality